PARRISH POOLS CO., INC.  http://www.ppciusa.com   
Barppcspecialists.gif (3389 bytes)     Serving Maryland, Delaware, DELMARVA, and Pennsylvania
Hunt Valley, Maryland USA   PH: (410) 667-1177    FAX: (410) 667-1804 FAX
   
Prices, Support, & Customer Service Email: custserv@ppciusa.com     

Thermoplastic Butterfly Valves with Lever Handle

DESIGN SPECIFICATIONS
Thermoplastic Butterfly Valves 2"-8" are wafer style to fit between ANSI B16.5 Class 150 flanges. Disc is smooth and contoured for lowest possible pressure drop ( highest Cv). Shaft is 410 S.S. and of one piece, through shaft design, with square drive through entire length of blade. 2" - 6" valves shall be complete with a spring loaded minimum 11 position latch lever. 8" valves shall be either spring lever or gear actuated as required or specified. Seat liners shall be full faced with integral, ribbed flanges. No auxiliary gaskets shall be used for installation. Seat liners shall effectively isolate the body and shaft from the flow media. Seat liners shall also thermally insulate the body from the internal operating temperature. Valve liner and seals are replaceable. Materials of construction shall be: (select as required for service).

Body PVC,CPVC available to 12", ASTM D-1784
PP, ASTM D-4101
PVDF, ASTM D-3222
Disc
 

PP, ASTM D-4101 (Standard 2"-8" in PVC and PP valves)
PVC,CPVC, ASTM D-1784 (CPVC disc standard in CPVC valves)
PVDF, ASTM D-3222

Shaft ASTM A-240, TYPE 410 S.S. (Standard) 304 S.S., 316 S.S. and Titanium available
Seat / Seals

EPDM, Ethylene Propylene Diene Monomer
Fluorocarbon, Viton (Dupont Dow Elastomers)
Nitrile (BUNA-N)

Hardware 2" THRU 24" 304 S.S. 8" size positioner plate 410 S.S. Chrome Plated
Lever ABS, ASTM D-1788
Gear Box Cast iron housing ASTM A -53, Epoxy coated
   
 

Not recommended for compressed air or gas service.

Materials Of Construction

Item Parts Pcs

Materials

1 Body 1 PVC,CPVC*, PP,PVDF
2 Disc 1 PVC,CPVC*, PP,PVDF
3 Stem 1 SUS410, SUS304, SUS316
4 Stem O-Ring 2 EPDM,VITON® BUNA N
5 Washer 1 SUS304
6 Seat 1 EPDM,VITON® BUNA N
7 Disc O-Ring 2 EPDM,VITON® BUNA N
8 Disc O-Ring 2 EPDM,VITON® BUNA N
9 Stem Retainer 1 SUS304
10 Retainer Cap 1 PVC,CPVC,PP, PVDF
11 Positioner 1 SUS304, 8" use SS41
12 Screw 3 SUS304
13 Handle 1 ABS
14 Inserted Metal of Handle 1 CS
15 Nut 1 PVC coated brass, SUS304
16 Hand Lever 1 SUS304, SUS41
17 Spring 1 SUS304
18 Set Pin 1 Brass

*CPVC available to 12"
VITON® is a trademark of  Dupont Dow Elastomers.

Butterfly Valves

Part # Description Price Order
ValvButt200 2" Butterfly Valve with Red Lever Handle 169.00
ValvButt250 2-½" Butterfly Valve with Red Lever Handle 189.00
ValvButt300 3" Butterfly Valve with Red Lever Handle 199.00
ValvButt400 4" Butterfly Valve with Red Lever Handle 239.00
ValvButt600 6" Butterfly Valve with Red Lever Handle 349.00
ValvButt800 8" Butterfly Valve with Red Lever Handle 495.00

                                             

Flanges (If Needed)

Part # Description Price Order
Flange200 2" Schedule 80 Van Stone Flange 29.00
Flange250 2-1/2" Schedule 80 Van Stone Flange 35.00
Flange300 3" Schedule 80 Van Stone Flange 32.75
Flange400 4" Schedule 80 Van Stone Flange 39.00
Flange600 6" Schedule 80 Van Stone Flange 49.00
Flange800 8" Schedule 80 Van Stone Flange 65.00

                                             

Flange Bolt Kits - Sold in Sets of 4 or 8.  "Set of 4" contains (4) Flange Bolts, (8) Washers, and (4) nuts.  "Set of 8" contains (8) Flange Bolts, (16) Washers, and (8) nuts.  Note:  2" and 3" Size Flanges can accept (4 Bolts each).  Flanges that are 4", 6", and 8" Flanges can accept (8 Bolts each).

Part # Description Price Order
 FBKit-58-550-4 5/8" x 5-1/2" Flange Bolt Kit, with 2-washers and Nut, Set of 4 15.00
 FBKit-58-550-8 5/8" x 5-1/2" Flange Bolt Kit, with 2-washers and Nut, Set of 8 21.00
 FBKit-58x600-8 5/8" x 6" Flange Bolt Kit, with 2-washers and Nut, Set of 8 22.00
 FBKit-58x650-8 5/8" x 6-1/2" Flange Bolt Kit, with 2-washers and Nut, Set of 8 23.00
       
 FBKit-34x600-8 3/4" x 6" Flange Bolt Kit, with 2-washers and Nut, Set of 8 25.00
 FBKit-34x700-8 3/4" x 7" Flange Bolt Kit, with 2-washers and Nut, Set of 8 25.00
       

                                                         



Back to Valve Catalog

Back to Parrish Pools USA On-Line Catalog

Home ] Up ]
Orders must be Pre-Paid by Visa, MasterCard, Discover, AMEX, or Check in Advance.   Prices are subject to change without notice.  Prices are in US Dollars.   All Sales are Final.   Special Order items are non-returnable and non-refundable, and may require a deposit.  Return Policy: Returned Items must have an Returned Goods Authorization Number (RGA) & may be subject to a 25% Restocking Fee.    Volume & Special Pricing is Available.    Email or Call 410-667-1177 to Confirm Prices.   To Place an Order, Call us at  (410) 667-1177  Mon-Fri, 9am-5pm EST, or Fax the order to (410) 667-1804 Fax.  Email to custserv@ppciusa.com    Fax Quote Desk 410-667-1804 FaxCopyright 2002-2012 Parrish Pools Co., Inc.  117 Old Padonia Rd.  Hunt Valley, Md. 21030  USA.  Prices, Product Specifications, and Appearances may be subject to change without notice.  Privacy Policy